I have a fresh installation of SCCM 2007. I am using an account with full domain admin rights. I have collected 1500+ computers in my domain. I have broken them down into smaller collections, but I am still unable to install the client. I have tried installing from the management console. I have tried doing it manually, either using client.msi or ccmsetup.exe. Here is part of a log from one of our servers: <![LOG[Installation succeeded.]LOG]!><time="14:38:01.057+240" date="10-22-2008" component="ccmsetup" context="" type="1" thread="5504" file="msiutil.cpp:890"><![LOG[Successfully deleted the ccmsetup service]LOG]!><time="14:38:06.057+240" date="10-22-2008" component="ccmsetup" context="" type="1" thread="5504" file="ccmsetup.cpp:3431"><![LOG[A Fallback Status Point has not been specified. Message with STATEID='400' will not be sent.]LOG]!><time="14:38:06.057+240" date="10-22-2008" component="ccmsetup" context="" type="1" thread="5504" file="ccmsetup.cpp:9169"><![LOG[Deleted file C:\WINDOWS\system32\ccmsetup\ccmsetup.cab]LOG]!><time="14:38:06.057+240" date="10-22-2008" component="ccmsetup" context="" type="1" thread="1716" file="ccmsetup.cpp:8908"><![LOG[Deleted file C:\WINDOWS\system32\ccmsetup\ccmsetup.xml]LOG]!><time="14:38:06.057+240" date="10-22-2008" component="ccmsetup" context="" type="1" thread="1716" file="ccmsetup.cpp:8908"><![LOG[Deleted file C:\WINDOWS\system32\ccmsetup\client.msi]LOG]!><time="14:38:06.057+240" date="10-22-2008" component="ccmsetup" context="" type="1" thread="1716" file="ccmsetup.cpp:8908"> Even though it says the client has succeeded, it still does not appear with a YES in the management console. I am looking for the best way to install clients on all of my computers. Any help would be greatly appreciated. Thanks

We do support client installation using ccmsetup.exe, but not via client.msi directly. If the client installation was ok as the log indicated, could you please make sure thatthe client can register with the site ok by looking at the ClientIDManagerStartup.log? If this log is clean, can you check to see whetherthe client cancommunicate with the site server fine by looking at the ccmexec.log on the client? If this log is also clean, could you to initiate an DDR sending from the client (Control Panel-Configuration Manager-Action tab-Select "Discovery Data Collection Cycle"-Click "Initiate Action"), then update and refresh the All Systems Colleciton on the Admin UI? If you see any error on the log that you look at, it would explain why the Admin UI does not show that the machine has a client. You can post error(s), if any, in those logs, we will try to help you to troubleshoot further. Thanks, Minh.

Wow, thanks for the info, it is much appreciated From what I could tell the ClientIDManagerStartup.log looked ok. I did not the below in the ccmexec.log <![LOG[Starting CCMEXEC service...]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2106"><![LOG[Running on machineXXXXXXXX as user SYSTEM.]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2110"><![LOG[Initializing COM.]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2131"><![LOG[Registering for logging change notifications.]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2144"><![LOG[Setting default logging component for process.]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2161"><![LOG[Setting service status to RUNNING.]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2181"><![LOG[Checking configuration.]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2199"><![LOG[Successfully Created Thread for CheckConfiguration. Waiting for Configuration to Complete]LOG]!><time="14:47:40.592+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2208"><![LOG[Performance counter registrations are missing or corrupted. Repair required.]LOG]!><time="14:47:40.608+240" date="10-31-2008" component="CCMEXEC" context="" type="2" thread="3916" file="entrypoint.cpp:919"><![LOG[Detected faulty configuration. Repair will be started in 5 minutes.]LOG]!><time="14:47:40.623+240" date="10-31-2008" component="CcmExec" context="" type="3" thread="4920" file="entrypoint.cpp:2344"><![LOG[Entering main message loop.]LOG]!><time="14:47:40.623+240" date="10-31-2008" component="CcmExec" context="" type="1" thread="4920" file="entrypoint.cpp:2371">

If ClientIDManagerStartup.log is ok, could check the client UI on the Advanced tab to see whether the client can get a site code? From the ccmexec.log, your client has trouble to function well; thus, preventing the client fromcontact with the site server to send DDR,a repair is kicked off (The logs show that "Performance counter registrations are missing or corrupted. Repair required.Detected faulty configuration. Repair will be started in 5 minutes.") Can you check to see whetherafter the repair, the client works ok?

I have done several repairs, no luck. I have also tryed installing manually with no luck. My client does show the correct Site code, but I still am unable to install the client on anything. I have the majority of my computers are Assinged to the correct site. But no matter what I do, they will not install the client. I have even created a group policy to push out the ccmsetup.msi file, but that does not seem to be having any effect. Here is the latest log info from ccmexec.log <![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="09:12:12.483+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="09:12:12.483+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="09:12:12.483+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_base.cpp:393"><![LOG[SystemTaskProcessor::QueueEvent(PowerChanged, 0)]LOG]!><time="09:23:43.516+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="2192" file="systemtaskprocessor.cpp:340"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="09:28:12.502+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{DateTime = "20081107142812.549000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2188;StatusCode = 500;ThreadID = 3984;};]LOG]!><time="09:28:12.549+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="09:28:12.549+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="09:28:12.549+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="09:28:12.549+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_base.cpp:393"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="10:00:12.587+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{DateTime = "20081107150012.618000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2188;StatusCode = 500;ThreadID = 3984;};]LOG]!><time="10:00:12.618+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="10:00:12.618+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="10:00:12.634+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="10:00:12.634+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_base.cpp:393"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="10:32:14.127+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{DateTime = "20081107153214.142000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2188;StatusCode = 500;ThreadID = 3984;};]LOG]!><time="10:32:14.142+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="10:32:14.142+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="10:32:14.142+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="10:32:14.142+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_base.cpp:393"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="11:36:14.283+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{DateTime = "20081107163614.314000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2188;StatusCode = 500;ThreadID = 3984;};]LOG]!><time="11:36:14.314+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3984" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="11:36:14.314+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="11:36:14.314+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="11:36:14.314+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="3984" file="forwarder_base.cpp:393">

Here is some addtional information, from a user computer I tried to install the agent on <![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="12:15:14.476+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="200" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:029CA3C6-A6FD-4DA5-B0C8-68E2A12AB2A7";DateTime = "20081107171514.492000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 404;StatusCode = 500;ThreadID = 200;};]LOG]!><time="12:15:14.492+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="200" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="12:15:14.492+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="12:15:14.492+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="12:15:14.492+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_base.cpp:393"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="13:19:12.571+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="200" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:029CA3C6-A6FD-4DA5-B0C8-68E2A12AB2A7";DateTime = "20081107181912.587000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 404;StatusCode = 500;ThreadID = 200;};]LOG]!><time="13:19:12.587+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="200" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="13:19:12.587+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="13:19:12.587+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="13:19:12.587+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_base.cpp:393"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system_windowsauth/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="15:26:58.144+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="200" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:029CA3C6-A6FD-4DA5-B0C8-68E2A12AB2A7";DateTime = "20081107202658.160000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 404;StatusCode = 500;ThreadID = 200;};]LOG]!><time="15:26:58.160+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="200" file="event.cpp:525"><![LOG[HandleRemoteSyncSend failed (0x80040231).]LOG]!><time="15:26:58.160+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_client.cpp:1308"><![LOG[CForwarder_Sync:end failed (0x80040231).]LOG]!><time="15:26:58.160+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_client.cpp:1380"><![LOG[CForwarder_Base:end failed (0x80040231).]LOG]!><time="15:26:58.160+300" date="11-07-2008" component="CCMEXEC" context="" type="3" thread="200" file="forwarder_base.cpp:393"><![LOG[SystemTaskProcessor::QueueEvent(Logon, 0)]LOG]!><time="15:37:33.450+300" date="11-07-2008" component="CCMEXEC" context="" type="1" thread="3456" file="systemtaskprocessor.cpp:340">------------------------------------<![LOG[Updated security on object C:\WINDOWS\system32\ccmsetup\.]LOG]!><time="15:09:55.919+300" date="11-07-2008" component="ccmsetup" context="" type="0" thread="2728" file="ccmsetup.cpp:8688"><![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="15:09:55.919+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="2728" file="ccmsetup.cpp:9165"><![LOG[Request failed: 500 Internal Server Error]LOG]!><time="15:09:56.153+300" date="11-07-2008" component="FSPStateMessage" context="" type="3" thread="2728" file="fsputillib.cpp:1300"><![LOG[Running as user "SYSTEM"]LOG]!><time="15:09:56.153+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:2529"><![LOG[Detected 19854 MB free disk space on system drive.]LOG]!><time="15:09:56.153+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:459"><![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="15:09:56.153+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:505"><![LOG[Client OS is not Windows XP Embedded]LOG]!><time="15:09:56.153+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:542"><![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="15:09:56.153+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:2613"><![LOG[Successfully ran BITS check.]LOG]!><time="15:09:56.278+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:6944"><![LOG[Client SSL is disabled. Setting state to 0x0.]LOG]!><time="15:09:56.293+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmutillib.cpp:184"><![LOG[Certificate doesn't have EKU, meaning good for all usages.]LOG]!><time="15:09:56.324+300" date="11-07-2008" component="ccmsetup" context="" type="0" thread="1744" file="ccmcert.cpp:415"><![LOG[Certificate doesn't have EKU, meaning good for all usages.]LOG]!><time="15:09:56.324+300" date="11-07-2008" component="ccmsetup" context="" type="0" thread="1744" file="ccmcert.cpp:415"><![LOG[Verified file 'C:\WINDOWS\system32\ccmsetup\ccmsetup.cab' is MS signed.]LOG]!><time="15:09:56.324+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:1048"><![LOG[Successfully extracted manifest file C:\WINDOWS\system32\ccmsetup\ccmsetup.xml from file C:\WINDOWS\system32\ccmsetup\ccmsetup.cab.]LOG]!><time="15:09:56.324+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="ccmsetup.cpp:7072"><![LOG[Loading manifest file: C:\WINDOWS\system32\ccmsetup\ccmsetup.xml]LOG]!><time="15:09:56.324+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="manifest.cpp:93"><![LOG[Successfully loaded ccmsetup manifest file.]LOG]!><time="15:09:56.340+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="1744" file="manifest.cpp:105"><![LOG[Failed to correctly receive a WEBDAV HTTP request.]LOG]!><time="15:09:56.340+300" date="11-07-2008" component="ccmsetup" context="" type="3" thread="1744" file="ccmsetup.cpp:6064"><![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 501)]LOG]!><time="15:09:56.340+300" date="11-07-2008" component="ccmsetup" context="" type="3" thread="1744" file="ccmsetup.cpp:6065"><![LOG[Sending Fallback Status Point message, STATEID='301'.]LOG]!><time="15:09:56.340+300" date="11-07-2008" component="ccmsetup" context="" type="1" thread="2728" file="ccmsetup.cpp:9165"><![LOG[Request failed: 500 Internal Server Error]LOG]!><time="15:09:56.356+300" date="11-07-2008" component="FSPStateMessage" context="" type="3" thread="2728" file="fsputillib.cpp:1300">

The client is installed and working properly. It just isn't communicating with the MP correctly. Is WebDav setup in the IIS of the MP? Is thisa Native mode server? Do you have a client on the MP. Does it communicate correctly. Run the MP test http://sms2003/sms_mp/.sms_aut?MPLIST See if you see nothing (which is good) or an error from the client

This is a mixed mode server. As for WebDav how do I tell if it is setup and working correctly. I can look at IIS for the MP and according to that it is installed and 'allowed'. I have tried to install a client on the MP and have not had any luck, at least it does not show up in the SCCM or Control Panel. If I try to run that test, it says the 'website cannot display the page'

Sounds like the MP is all messedup, which is why the client installs but doesn't communicate back that it is done. You might need to uninstall IIS and or the MP. Start with the MP. Since that is were your problem lies.

I only have a one SCCM server. When you say uninstall MP, do you mean uninstall SCCM and reinstall it? If not, is there a way to just uninstall the MP? Thanks

You definitely do not need to uninstall ConfigMgr! If you go to Site Settings, Site Systems, <your server>, right-click on the ConfigMgr Management Point Role, and delete it. (you might want to look at properties first, just so you know what you currently have). Monitor mpsetup.log to see it uninstall successfully. Then right-click on <your server> and add back the role; and monitor mpsetup.log again to see it install (hopefully successfully, or the log may tell you it's failing).

Ok, I removed and re-added the MP role. According to the log, it was successful. Still no luck on the client install: <![LOG[MESSAGE PAYLOAD TRANSFER COMPLETE:Status : SUCCESSDirection: UploadMsg ID: {D3EA185A-9E9F-4E96-820C-9FB54C27CC4D}BITS Job ID: {E5643EA1-0107-48DE-BA3E-7ED7CCCD4E19}Start time : 11/10/2008 17:32 (GMT)Completion time : 11/10/2008 17:32 (GMT)Elapsed time : 5 seconds]LOG]!><time="12:32:17.400+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5812" file="messagestate.cpp:105"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110173219.525000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x00000000";ProcessID = 2136;StatusCode = 0;ThreadID = 5812;};]LOG]!><time="12:32:19.525+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5812" file="event.cpp:525"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110173406.466000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x00000000";ProcessID = 2136;StatusCode = 0;ThreadID = 3344;};]LOG]!><time="12:34:06.466+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="3344" file="event.cpp:525"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110174050.651000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x00000000";ProcessID = 2136;StatusCode = 0;ThreadID = 492;};]LOG]!><time="12:40:50.651+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="492" file="event.cpp:525"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110180150.903000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x00000000";ProcessID = 2136;StatusCode = 0;ThreadID = 5780;};]LOG]!><time="13:01:50.903+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5780" file="event.cpp:525"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="13:04:03.796+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="3368" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110180403.812000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2136;StatusCode = 503;ThreadID = 3368;};]LOG]!><time="13:04:03.812+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="3368" file="event.cpp:525"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="13:05:13.845+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5584" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110180513.970000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2136;StatusCode = 501;ThreadID = 5584;};]LOG]!><time="13:05:13.970+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5584" file="event.cpp:525"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system/request, Port=80, Protocol=http, SSLOptions=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="13:06:54.020+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5584" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110180654.035000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x8004027e";ProcessID = 2136;StatusCode = 501;ThreadID = 5584;};]LOG]!><time="13:06:54.035+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="5584" file="event.cpp:525"><![LOG[Could not load logging configuration for component FileSystemFile. Using default values.]LOG]!><time="13:09:04.461+300" date="11-10-2008" component="CcmExec" context="" type="2" thread="2820" file="stdlogging.cpp:529"><![LOG[Failed in WinHttpReceiveResponse API, ErrorCode = 0x2f78]LOG]!><time="13:10:08.072+300" date="11-10-2008" component="CcmExec" context="" type="3" thread="536" file="ccmhttppost.cpp:853"><![LOG[[CCMHTTP] HTTP ERROR: URL=http://CLENETMON.CHART-IND.LOCAL/ccm_system/request, Port=80, Protocol=http, SSLOptions=0, Code=12152, Text=ERROR_WINHTTP_INVALID_SERVER_RESPONSE]LOG]!><time="13:10:08.135+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="536" file="ccmhttperror.cpp:264"><![LOG[Raising event: instance of CCM_CcmHttp_Status{ClientID = "GUID:EA725A17-1F23-472C-9925-F274B41EC996";DateTime = "20081110181008.151000+000";HostName = "CLENETMON.CHART-IND.LOCAL";HRESULT = "0x80072f78";ProcessID = 2136;StatusCode = 0;ThreadID = 536;};]LOG]!><time="13:10:08.151+300" date="11-10-2008" component="CcmExec" context="" type="1" thread="536" file="event.cpp:525">

HOLD ON! That may have been the ticket. I have my test computer registering as having a client installed. Let me test it out some more and I will let you know

I am hoping that does the trick.

I encountered this issue as well. It turns out the Management Point wasn’t fully installed / installed properly. In my MP_Setup log (Program Files (x86)\Microsoft Configuration Manager\Logs\MPSetup.log), I noticed it was unhappy with the webdav settings (“WebDAV settings is not setup appropriately”). I verified the settings were correct, but then ran across this article: http://blogs.technet.com/b/configurationmgr/archive/2010/10/26/error-the-webdav-server-extension-is-either-not-installed-or-not-configured-properly-in-configuration-manager-2007.aspx Apparently the people who wrote the IIS UI were only half serious. J Adjusting the XML file directly, and then (re)installing the MP ultimately cleared up my client errors. Mike Crowley | MVP My Blog -- Planet Technologies