Air ducts does not change the dimension?
If I choose a channel of 300mm and is based on a 90 bend to get the bend diameter 600mm, this corrected itself automatically in Visio 2007.
May 31st, 2013 7:29am
Hi,
Did you mean that the issue is related to Visio 2010?
And could you give me the steps to reproduce the issue?
Free Windows Admin Tool Kit Click here and download it now
June 3rd, 2013 9:44am
Hi
Open the following formula: formulas maps / floorplans Building Plan HVAC ducts. Select a channel and remove the stencil and change it to 500.vlj a bend and pull out to 500 duct, in vison 2007 as amended dim to a round 500 bend automatiskt.har tried with vision 2010, 2013, and it does not work.
My question is where to find this setting.
The same problem when drawing a house and be put into a door.
the wall is 300mm thick, and inserting a door so it does not go through the wall.
Open the following formula: formulas maps / floorplans Building Plan HVAC ducts. Select a channel and remove the stencil and change it to 500.vlj a bend and pull out to 500 duct, in vison 2007 as amended dim to a round 500 bend automatiskt.har tried with vision 2010, 2013, and it does not work.
My question is where to find this setting.
The same problem when drawing a house and be put into a door.
the wall is 300mm thick, and inserting a door so it does not go through the wall.
June 10th, 2013 2:29pm
This topic is archived. No further replies will be accepted.
Other recent topics
