I have some error's that may need to be resolved and need some feedback. Some info has been removed. I'm not so concerned about the 2003 Exchange Server as it will be removed. I'm more concerned about the new 2010 server and issues that should keep it from production. 11:12:27.243: There is an error (Not supported ) on the WMI search SELECT __RELPATH, Active, DriverName, DriverVersion, FirmwareVersion, HardwareVersion, HBAStatus, Manufacturer, Model, ModelDescription, NodeWWN, NumberOfPorts, OptionROMVersion, UniqueAdapterId FROM MSFC_FCAdapterHBAAttributes on scope root\WMI on server exchange.XXX.local. Skipping object. 11:12:27.290: There is an error (Not supported ) on the WMI search SELECT __RELPATH, Statistics.DumpedFrames, Statistics.ErrorFrames, Statistics.InvalidCRCCount, Statistics.InvalidTxWordCount, Statistics.LinkFailureCount, Statistics.LossOfSignalCount, Statistics.LossOfSyncCount, Statistics.PrimitiveSeqProtocolErrCount, Statistics.SecondsSinceLastReset, Statistics.TxFrames FROM MSFC_FibrePortHBAStatistics on scope root\WMI on server exchange.XXX.local. Skipping object. 11:12:27.352: There is an error (Not supported ) on the WMI search SELECT __RELPATH, Attributes.NumberOfDiscoveredPorts, Attributes.PortMaxFrameSize, Attributes.PortSpeed, Attributes.PortState, Attributes.PortSupportedSpeed, Attributes.PortType, Attributes.PortWWN FROM MSFC_FibrePortHBAAttributes on scope root\WMI on server exchange.XXX.local. Skipping object. 11:12:35.416: An error occurred (The server is not operational.) while trying to search for the object LDAP://exchange.XXX.local/--. Skipping object. 11:12:38.863: There is an error (Invalid query ) on the WMI search SELECT __RELPATH, VMLargestBlockSize, ACLUpgradefailures FROM Win32_PerfRawData_MSExchangeIS_MSExchangeIS on scope root\cimv2 on server EXCH2010.XXX.local. Skipping object. 11:12:47.099: There is an error (Not supported ) on the WMI search SELECT __RELPATH, Active, DriverName, DriverVersion, FirmwareVersion, HardwareVersion, HBAStatus, Manufacturer, Model, ModelDescription, NodeWWN, NumberOfPorts, OptionROMVersion, UniqueAdapterId FROM MSFC_FCAdapterHBAAttributes on scope root\WMI on server EXCH2010.XXX.local. Skipping object. 11:12:47.114: There is an error (Not supported ) on the WMI search SELECT __RELPATH, Statistics.DumpedFrames, Statistics. ErrorFrames, Statistics.InvalidCRCCount, Statistics.InvalidTxWordCount, Statistics.LinkFailureCount, Statistics.LossOfSignalCount, Statistics.LossOfSyncCount, Statistics.PrimitiveSeqProtocolErrCount, Statistics.SecondsSinceLastReset, Stati stics.TxFrames FROM MSFC_FibrePortHBAStatistics on scope root\WMI on server EXCH2010.XXX.local. Skipping object. 11:12:47.114: There is an error (Not supported ) on the WMI search SELECT __RELPATH, Attributes.NumberOfDiscoveredPorts, Attributes.PortMaxFrameSize, Attributes.PortSpeed, Attributes.PortState, Attributes.PortSupportedSpeed, Attributes.PortType, Attributes.PortWWN FROM MSFC_FibrePortHBAAttributes on scope root\WMI on server EXCH2010.XXX.local. Skipping object. 11:12:48.409: An error occurred (The system cannot find the path specified. (Exception from HRESULT: 0x80070003)) whileaccessing the metabase key /LM/W3SVC/AppPools/MSExchangeUMAppPool on server EXCH2010.XXX.local. Skipping object. 11:12:49.657: The term 'Get-UMVirtualDirectory' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. 11:12:50.655: The term 'Get-UMVirtualDirectory' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. 11:12:55.007: An error occurred (The server is not operational.) while trying to search for the object LDAP://EXCH2010.XXX.local/--. Skipping object. 11:12:58.922: There is an error (Invalid namespace ) on the WMI search SELECT * FROM Exchange_FolderTree on scope root\MicrosoftExchangeV2 on server EXCH2010. Skipping object. 11:13:02.432: Completed Collecting Data phase. 11:13:03.679: Starting the Postprocessing Rules phase. 11:13:03.882: Error 'Function 'version-compare()' has failed.' in evaluation of node fExchange2003SP2PreRTMBuild 11:13:03.960: Completed Postprocessing Rules phase. 11:13:04.958: Saving data to file …..201103031112005396.data.xml. Thanks for looking

Which version of ExBPA did you run?Missy

Which version of ExBPA did you run? Missy Version 14.01.0218.011 It was run from the EMS.

IS anyone watching this thread?

Hi, Where do you get above error messages? Are they from EMS? First, I suggest you install Service Pack 1 and all latest updates for Exchange server 2010 to check the result. If the issue persists, please check whether there is any error message in Event Log. If so, please post it here for research. Thanks. NovakPlease remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

The Server is fully patched! Both the O/S and Exchange were fully completed prior to this. I wanted to ensure that EVERYTHING was fully updated, prior to moving all mailboxes and using it in full production. I’m concerned about the WMI errors and this one…..search SELECT * FROM Exchange_FolderTree on scope root\MicrosoftExchangeV2 on server. My event logs show mostly show “Couldn't find an Exchange 2010 or later public folder server with a replica for the free/busy folder:” I should be able to fix this one after I move the public folders to the 10 server. I am not bothering with any of the Exchange 03 messages.

Did you try to update the Exbpa? Cause 2.8 is the latest update. Make sure you download the latest update for Exbpa, when you do check for update in Exbpa, and if there is any update available than download the install it. For your latest post... Make sure you reboot the sever before you start the migration. Cheers,Gulab | MCTS-MCITP Messaging: 2010 | MCTS-MCITP Messaging: 2007 | MCC 2011 | Skype: Gulab.Mallah

When going directly to the file it is version 14.01.0218.011. You are certified, then you know running BPA from the EMC is able to update itself prior to running a scan? It updates on each start. I am not running a stand alone Analyzer. There does not seem to be complelling information to do so. If you have a reason to run the stand alone Analyzer for Small business server please share it.

No. ExBPA on Exchange server 2010 and Exchange 2007 need not update itself. ExBPA version 2.8 is only applied to Exchange 2003. For more information, please refer to the following article: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=dbab201f-4bee-4943-ac22-e2ddbd258df3&displaylang=en At this stage, I would like to confirm whether ExBPA can be run in Toolbox from EMC. Is there any error message? Based on my test in my lab, I found that the “WMI Search” error also exists on my machine. By default, the ExBPACmd runs all categories and some of WMI search is run in background which should be ignored. To detect any real problem, it’s recommended to run ExBPA in GUI interface. Thanks. NovakPlease remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Novak, I run ExBPA from the EMC toolbox. It checks for updates when starting, this should only help and seems fine. ExBPA shows... All Issues : Active Directory Forest Write DACL inherit (group) : Active Directory Forest The Write DACL inherit (group) right for the Exchange Enterprise Servers group should be removed from the root of the domain. Tell me more about this issue and how to resolve it. Organization: HDH Junk store threshold not configured Organization: XXX The Junk Store threshold is currently configured to move messages to a recipient's Junk E-Mail folder when they have a Spam Confidence Level (SCL) value of 8. The recommended value is 4. You can configure SCL thresholds by using the Set-OrganizationConfig cmdlet in the Exchange Management Shell. Tell me more about this setting. Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT) Server: EXCH2010 SSL is enabled on the IIS root directory Server: EXCH2010 SSL is enabled on the IIS root directory of Client Access server EXCH2010.xxx.xxx. This will break HTTP redirection from other Client Access servers unless it is disabled. Paging file size less than Physical Memory size plus 10 MB Server: EXCH2010 The paging file size (16384) is less than the physical memory size (32758) plus 10 MB. It is recommended that the paging file size equal the physical memory size plus 10 MB. Tell me more about this issue and how to resolve it. Self-signed certificate found Server: EXCH2010 The SSL certificate for 'https://exch2010.xxx.xxx/Autodiscover/Autodiscover.xml' is self-signed. It does not provide any of the security guarantees provided by authority-signed or trusted certificates. It is strongly recommended that you install an authority-signed or trusted certificate. Self-signed certificate found Server: EXCH2010 The SSL certificate for 'https://exch2010.xxx.xxx/EWS/Exchange.asmx' is self-signed. It does not provide any of the security guarantees provided by authority-signed or trusted certificates. It is strongly recommended that you install an authority-signed or trusted certificate. Self-signed certificate found Server: EXCH2010 The SSL certificate for 'https://exch2010.xxx.xxx/Microsoft-Server-ActiveSync' is self-signed. It does not provide any of the security guarantees provided by authority-signed or trusted certificates. It is strongly recommended that you install an authority-signed or trusted certificate. Self-signed certificate found Server: EXCH2010 The SSL certificate for 'https://exch2010.xxx.xxx/owa' is self-signed. It does not provide any of the security guarantees provided by authority-signed or trusted certificates. It is strongly recommended that you install an authority-signed or trusted certificate. Temporary file path optimization Server: EXCH2010 The TEMP path on server EXCH2010.xxx.xxx is located on the same drive as the system partition. This may cause performance problems. Current TEMP path: %SystemRoot%\TEMP. Tell me more about this issue and how to resolve it. Temporary file path optimization Server: EXCH2010 The TMP path on server EXCH2010.xxx.xxx is located on the same drive as the system partition. This may cause performance problems. Current TMP path: %SystemRoot%\TEMP. Tell me more about this issue and how to resolve it. Application log size Server: EXCH2010 As a best practice, the size of the Application log on server EXCH2010.xxx.xxx should be increased. The current size is 20 MB. For servers running Microsoft Exchange, a size of 40 MB or more is recommended. Tell me more about this setting. Network interface teaming is enabled Server: EXCH2010 Network interface teaming is enabled on server EXCH2010.xxx.xxx. Ensure that the latest drivers are installed. Current driver: HP Network Teaming Virtual Miniport Driver - 10.20.0.0 - 11-3-2010. Network interface teaming is enabled Server: EXCH2010 Network interface teaming is enabled on server EXCH2010.xxx.xxx. Ensure that the latest drivers are installed. Current driver: HP Network Teaming Virtual Miniport Driver - 10.20.0.0 - 11-3-2010. PDC emulator is not excluded from the Active Directory Access (ADAccess) topology Server: EXCH2010 A recommended value for the 'MinUserDc' registry entry on server 'EXCH2010.xxx.xxx' should be between 1 and 1. As a best practice, create this registry entry to avoid overloading the PDC emulator. Tell me more about this setting.

How's the issue currently? Have you fixed the issues with the links under each of them?Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

James, yes and no. It seems to be a non issue in that if corrections were made to security and certs then the client validates these errors are still present and do not seem to impact the the client. I am chasing another issue right now and when finished I will rerun the test again. for now this is unresolved.