Exchange Migration Public folder
Hi
I was about finishing migration all mailboxes from Exchange 2007 to 2013
The next step should be Public folder but in exchange 2007 i didn't use public folder at all , it is madotary to migrate public folder from exchange 2007 to 2013 or ca i delete it from 2007 cause no
February 2nd, 2015 11:32pm
It is not mandatory to migrate public folder during Exchange migration, As you had not used Public Folder in Exchange 2007, So you can delete that from Exchange 2007
February 3rd, 2015 2:07am
In this case, you take a look at this article(
http://msexchangeguru.com/2013/04/18/exchange2013-public-folders/) which succinctly explain to migrate public folder from exchange 2007 to 2013 . Moreover, you could also try this exchange server migration tool (
http://www.exchangemigrationtool.com/ ) that assist to directly migrate the public folder data from Exchange 2010 Server to Exchange 2013 Server
I saw or this procedures but I don't want to migrate the old public folder , I don't need it
what shall we do in this case ?
once I shutdown the exchange 2007 all users shown a prompt box asking user and pass , they are trying to connect to the old public server located in Exchange 2007
I need to remove public folder from exchange 2007 .
February 3rd, 2015 6:27am
If you don't have any public folders to migrate don't worry because it's not mandatory. Do you want to create some public folders in 2013? What i do recommend is that you just don't shut down the 2007 server. You need to remove the public folder database
there and decommission that server. Any reason why you're not removing the 2007 server from the organization? Also if all users are already moved to 2013 (i assume they are as you said that you've had the 2007 shut down), and for some reason you don't want
to decommission the 2007 server (that is the recommended path), you should try the following cmdlet:
Set-OrganizationConfig -PublicFoldersEnabled None
you can also try step 6 from the following link:
https://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
which basically locks the access to public folders in 2007. Step 8 of the same link unlocks access to public folders in 2013.
But again why not decommission the 2007?
hope that helped
February 3rd, 2015 6:43am
Hi Antonio
I need to decommission exchange 2007 .
Is it the same steps?
February 3rd, 2015 12:07pm
Hi Yasser. If you need to decommission exchange 2007 than don't worry about the public folders. What you can do to see if your 2013 databases are using the 2007 public folder database is:
get-mailbox |fl name, *public* (on the 2013 exchange management shell)
also there's no harm on doing the steps i described on my last answer, although i think that you won't need to do that. Usually when a public folder database is configured to be used by a mailbox database, when uninstalling the mailbox role you get an error
stating that and you're not able to remove the role. So give it a try and remove the role. Let us know if you're getting any errors or if you can do a clean removal.
February 3rd, 2015 12:19pm
Hi,
Since you don't use public folders in Exchange 2007, there is no need to migrate public folders to Exchange 2013.
Before you remove Exchange 2007 server, you need to remove public folder database first. And please place the Exchange 2007 server offline temporarily and make sure Exchange 2013 works well. Then you can uninstall Exchange 2007 server.
Besides, here is a blog which may help you for your reference.
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-4-step-by-step-exchange-2007-to-2013-migration.aspx
Hope this is helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com
February 3rd, 2015 8:44pm
Yasser, just to add some more info. Like everyone is saying if you don't use the public folders you don't have to worry. If your problem is that when you shut down the 2007 server users get a basic auth pop up, the way around it is either to remove the exchange
2007 (highly recommended) or follow the steps of the migration that block the access to the 2007 public folders. As an example when you run Set-OrganizationConfig -PublicFoldersLockedForMigration:$true on the 2007 EMS (you can restart the 2007 information
store service to force it to be applied quickly) users will no longer try or be able to access the 2007 public folders.
then by running Set-OrganizationConfig -PublicFolderMigrationComplete:$true the public folders will be available (if existing) in 2013
But again just remove the server with a clean uninstall and you should be good.
February 4th, 2015 6:27am
I test today to migrate the old PF but I cannot
![](https://social.technet.microsoft.com/Forums/getfile/607900)
also I am trying to delete the public folder , it request to move the replica
![](https://social.technet.microsoft.com/Forums/getfile/607901)
my target now to decommission Exchange 2007 , still cannot
still users when I close the exchange 2007 showing in its outlook test connectivity they are still want to connect to the old PF .
how can I create new PF on Exchange 2013 and redirect all users to use it and ignor the old PF at all
I need help
February 5th, 2015 10:39am
Hi,
If you have public folders on Exchange 2007, and you want to migrate to Exchange 2013, you can refer to the following article to perform migration.
Use serial migration to migrate public folders to Exchange 2013 from previous versions
https://technet.microsoft.com/en-GB/library/jj150486(v=exchg.150).aspx
After you migrate public folders successfully, Exchange 2013 users should access public folders on Exchange 2013 server.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com
February 5th, 2015 7:55pm
Hi,
Since you don't use public folders in Exchange 2007, there is no need to migrate public folders to Exchange 2013.
Before you remove Exchange 2007 server, you need to remove public folder database first. And please place the Exchange 2007 server offline temporarily and make sure Exchange 2013 works well. Then you can uninstall Exchange 2007 server.
Besides, here is a blog which may help you for your reference.
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-4-step-by-step-exchange-2007-to-2013-migration.aspx
Hope this is helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com
February 6th, 2015 1:00am
Hi,
If you have public folders that have a backslash in the name, then you will get output when you run this command you mentioned.
If there aren't public folders that have a backslash in the name, then it returns nothing and this is expected.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com
February 8th, 2015 9:09pm
why this shown to me when i move the replica
![](https://social.technet.microsoft.com/Forums/getfile/607901)
February 9th, 2015 12:08am
Hi,
Have you finished the public folder migration to Exchange 2013?
In Exchange 2013, there is no replication between public folder mailboxes. This is not the same as what we replicate public folders in Exchange 2007.
After you migrate public folders to Exchange 2013 successfully, please remove public folder database using the Remove-PublicFolderDatabase command.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com
February 11th, 2015 6:03am
Hi,
Is there any update on this issue?
Best regards,
If you have feedback for TechNet Subscriber Support, contact
tnmff@microsoft.com
February 13th, 2015 12:25am
I delete the public folder from the adsi
This is the only way working with me
February 13th, 2015 12:29pm