Hi, From your description, I know that you have two servers, and want the Internet server share Internet access for LAN clients. Firstly, I’d like to confirm the following information. 1. How does Internet server access to ISP? Static IP or automatic? 2. Are the two servers in the same subnet? In order to troubleshoot, please post the unedited ipconfig /all for both servers. For two separate network is better to use a physical route to achieve the Internet sharing. However, for server 2003, we can also configure NAT to share connection to the Internet with private network. For detailed information about configure NAT server, please refer to the following articles: How to configure Network Address Translation in Windows Server 2003 http://support.microsoft.com/kb/816581 Enable and Configure NAT http://technet.microsoft.com/en-us/library/dd469812.aspx Best Regards, Aiden

I have two server OS 2003 , one for LAN and one for INTERNET.But I have problem when PC from LAN want Internet we upgrade on pc LAN CARD and cabe frow internet server switch but when all conected pc cant go on internet because two server have two gateway different. Is any way possibile without central network? Thaks a lot

Try remove Gateway from LAN TCP/IP and leave it on Internat TCP/IP Mohamed Abd Elhamid Abd Elaziz Microsoft System Administrator Abdul Samad Al Qurashi Co. My blog: http://Mabdelhamid.wordpress.com/

Hi, From your description, I know that you have two servers, and want the Internet server share Internet access for LAN clients. Firstly, I’d like to confirm the following information. 1. How does Internet server access to ISP? Static IP or automatic? 2. Are the two servers in the same subnet? In order to troubleshoot, please post the unedited ipconfig /all for both servers. For two separate network is better to use a physical route to achieve the Internet sharing. However, for server 2003, we can also configure NAT to share connection to the Internet with private network. For detailed information about configure NAT server, please refer to the following articles: How to configure Network Address Translation in Windows Server 2003 http://support.microsoft.com/kb/816581 Enable and Configure NAT http://technet.microsoft.com/en-us/library/dd469812.aspx Best Regards, Aiden

Internet server have static LAN address and static WAN address and PPPOE Connection with ADSL modem two server schema: first 192.168.10.254 subnet 255.255.255.0 gateway 192.168.10.1 second LAN 192.168.2.1 subnet 255.255.255.0 gateway 192.168.2.1 WAN 10.0.015 subnet 255.0.0.0. Sorry for my slow reply because am on course MCITP and dont have lot of time

Internet server have static LAN address and static WAN address and PPPOE Connection with ADSL modem two server have same subnet 255.255.255.0 Sorry for my slow reply because am on course MCITP and dont have lot of time