I Can't connect to the internet my ipconfig /all is Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Eth ernet Controller (NDIS 6.30) Physical Address. . . . . . . . . : 00-26-6C-D1-1F-0D DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4fd:8dd2:181c:a0d2%12(Preferred) IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 27 January 2013 12:28:45 PM Lease Expires . . . . . . . . . . : 28 January 2013 12:28:45 PM Default Gateway . . . . . . . . . : 10.0.0.138 DHCPv6 IAID . . . . . . . . . . . : 335554156 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-9F-87-2E-E0-CA-94-26-B1-58 DNS Servers . . . . . . . . . . . : 10.0.0.138 NetBIOS over Tcpip. . . . . . . . : Enabled

Hi, I suggest you change the Preferred DNS server, try the following steps: 1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter. 2. Right click on the connection that you use for the local connection, and then click "Properties". 3. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties". 4. In the Internet Protocol window, let's change the "Preferred DNS server" to 208.67.222.222 5. Click 'OK' twice to complete the modification. If the issue persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220. Also, if the issue persists, I suggest you run the following command: ipconfig /release ipconfig /renew to get IP address & DNS from DHCP, the DNS server should be internal DNS server IP Hope this helps. Vincent Wang TechNet Community Support

Hi, I suggest you change the Preferred DNS server, try the following steps: 1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter. 2. Right click on the connection that you use for the local connection, and then click "Properties". 3. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties". 4. In the Internet Protocol window, let's change the "Preferred DNS server" to 208.67.222.222 5. Click 'OK' twice to complete the modification. If the issue persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220. Also, if the issue persists, I suggest you run the following command: ipconfig /release ipconfig /renew to get IP address & DNS from DHCP, the DNS server should be internal DNS server IP Hope this helps. Vincent Wang TechNet Community Support