I have a laptop with windows 7 on domain, which can't connect to wireless network wpa-2 enterprise (AES), it can connect to my guest network using wpa2-psk (AES). It have recieved the certificate from CA, when is was plugged in the network. I recieved error 2002, eap method DLL path name not found (translated from danish se original below) Network card is intel 3465abg and driver is updated. It has been tried with a WL-172 usb card with same result. There is not event entry in the windows 2003 eventlog on the failed connection Springer over: Eap method DLL path kunne ikke valideres. Fejl: typeId=88, authorId=0, vendorId=0, vendorType=0

Hi, First, I suggest you involve the Network adapter manufacturer to verify whether the network adapter driver is supported WPA-2 Enterprise. Meanwhile, I would like to share you the following article about WPA2. Wi-Fi Protected Access 2 (WPA2) Overview If there is any error message, please capture the window and upload it for research. Thanks, Novak

Thanks It have been tried. The network card worked fine when the pc was with Vista. And since using an usb WL-172 gives the same result, I belive that it is an OS-problem

I have the same problem but with WPA. (and everything worked a week ago) .... http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/b57c95a4-62c2-484e-836d-672e42c334b6

A pdf of the error's has been uploaded on my skydrive public folder. If you need anything else just write

Hi, To access the error message, please share the public folder link here. Thanks, Novak

Hi, To access the error message, please share the public folder link here. Thanks, Novak My bad: http://cid-043272e16532488f.skydrive.live.com/browse.aspx/.Public

Hi, After analyzing the error message, please refer to the following article to troubleshoot the issue. Windows 7 wireless connection problem Thanks, Novak