I'm trying to get the Windows Phone 8 Emulator working which requires the installation of Hyper-V.  I have wasted already two days trying to install Hyper-V, it seems to install, gets to about 98%. and then I get a message:  "Failure configuring windows features, reverting changes". then it reboots and uninstalls/reverts the installation attempt..

I have tried the following:

DISM.exe /Online /Cleanup-Image /ScanHealth

DISM.exe /Online /Cleanup-Image /RestoreHealth

If no error detected, try to run 

Sfc /scannow

I have also tried to install using powershell, which doesn't seem to work..

If I look in the event viewer setup files I see the following entries:

Description:
Update Microsoft-Hyper-V of package Microsoft-Hyper-V-ClientEdition-Package failed to be turned on. Status: 0x800f0922.
Description:
A reboot is necessary before the selectable update Microsoft-Hyper-V of package Microsoft-Hyper-V-ClientEdition-Package can be turned on.
Description:
Initiating changes to turn on update Microsoft-Hyper-V-Management-PowerShell of package Microsoft-Hyper-V-ClientEdition-Package. Client id: Windows Optional Component Manager.
Description:
Initiating changes to turn on update Microsoft-Hyper-V-Management-Clients of package Microsoft-Hyper-V-ClientEdition-Package. Client id: Windows Optional Component Manager.

I have also run the coreinfo tool with the following results:

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.

C:\>coreinfo -v

Coreinfo v3.2 - Dump information on system CPU and memory topology
Copyright (C) 2008-2012 Mark Russinovich
Sysinternals - www.sysinternals.com

Intel(R) Core(TM) i7 CPU       M 620  @ 2.67GHz
Intel64 Family 6 Model 37 Stepping 5, GenuineIntel
HYPERVISOR      -       Hypervisor is present
VMX             *       Supports Intel hardware-assisted virtualization
EPT             *       Supports Intel extended page tables (SLAT)

So, did you reboot?

In the BIOS have you enabled SLAT, Execute Disable, and virtualization?  Then you did a cold boot? (pull battery and all if its a laptop)

In this thread:

http://social.technet.microsoft.com/Forums/windows/en-US/3369897e-5887-494f-a227-44b648e4ede6/cant-install-hyperv-client-on-windows-8-pro

Is also this:

- inserted the windows 8 media and chose repair

- went through diskpart to make the partition active again (i wasn't for some reason)

- ran bootrec /fixmbr + bootrec /fixboot + bootrec /rebuildbcd (just to be sure :))

- rebooting back into windows 8

- was able to install hyper-v now :)

Of Course I rebooted several times,

I never had to change anything in the bios as it was already enabled

All I want to do is run the Windows Phone emulator, this is a major drawback and a flawed installation to take so much time.

I will try the windows repair.

I've tried over and over again, it just doesn't want to work,  I have no problem with the vmplayer, however I even uninstalled it thinking it might be conflicting with hyper-v

I guess if I can't get this working shortly, I'll just forget about developing for Window Phone and just continue on with the other emulators that work

upload the folder C:\Windows\logs\CBS

Hi,

thanks,  here is the link, I tried to use SkyDive but it kept telling me I didn't have an internet connect..  so I have uploaded it elsewhere:

http://www.classifieds.ca/downloads/cbs.zip

thanks, in advance...

The Firewall rules can't be activated:

    Installer name: [13]"Firewall Rule"
2013-07-17 23:17:42, Info                  CSI    0000005f Performing 1 operations; 1 are not lock/unlock and follow:
  (0)  LockComponentPath (10): flags: 0 comp: {l:16 b:d77bd25d6583ce01270000009004cc04} pathid: {l:16 b:d77bd25d6583ce01280000009004cc04} path: [l:220{110}]"\SystemRoot\WinSxS\amd64_microsoft-hyper-v-firewallrules_31bf3856ad364e35_6.2.9200.16384_none_2cb0549fd19e1498" pid: 490 starttime: 130185908674153718 (0x01ce8364e948ccf6)
2013-07-17 23:17:42, Error                 CSI    0000000b (F) Logged @2013/7/18:03:17:42.938 : [ml:148{74},l:146{73}]"FirewallConfigInstaller:AddRemoveFirewallConfig() installation type is 4."
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    0000000c (F) Logged @2013/7/18:03:17:42.938 : [ml:132{66},l:130{65}]"FirewallConfigInstaller:AddRemoveFirewallConfig() SERVICING is 0."
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    0000000d (F) Logged @2013/7/18:03:17:42.938 : [ml:830{415},l:828{414}]"FirewallConfigInstaller:AddRemoveFirewallConfig() installing <firewallRule xmlns="urn:schemas-microsoft-com:asm.v3" action="allow" active="true" binary="%SystemRoot%\system32\svchost.exe" desc="@%systemroot%\system32\vmms.exe,-212" dir="In" group="@%systemroot%\system32\vmms.exe,-210" internalName="VIRT-WMI-RPCSS-In-TCP-NoScope" lPort="135" name="@%systemroot%\system32\vmms.exe,-211" protocol="6" svc="rpcss" />"
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    0000000e (F) Logged @2013/7/18:03:17:42.938 : [ml:146{73},l:144{72}]"FirewallConfigInstaller:AddRemoveFirewallConfig() Uninstalling a rule..."
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    0000000f (F) Logged @2013/7/18:03:17:42.938 : [ml:264{132},l:262{131}]"FirewallConfigInstaller::RemoveFirewallRule (VIRT-WMI-RPCSS-In-TCP-NoScope / @%systemroot%\system32\vmms.exe,-211, 7) from DEFAULTS"
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    00000010 (F) Logged @2013/7/18:03:17:42.938 : [ml:162{81},l:160{80}]"FirewallConfigInstaller::RemoveFirewallRule - CFirewall::Open failed: 0x80070002"
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    00000011 (F) Logged @2013/7/18:03:17:42.939 : [ml:184{92},l:182{91}]"FirewallConfigInstaller:AddRemoveFirewallConfig() RemoveFirewallRule() failed. (0x80070002)"
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    00000012@2013/7/18:03:17:42.939 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_WIN32(ERROR_FILE_NOT_FOUND)
 [
[44]"The system cannot find the file specified.

"
]
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    00000013@2013/7/18:03:17:42.939 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_WIN32(ERROR_FILE_NOT_FOUND)
	Element:
	[353]"<firewallRule xmlns="urn:schemas-microsoft-com:asm.v3" action="allow" active="true" binary="%SystemRoot%\system32\svchost.exe" desc="@%systemroot%\system32\vmms.exe,-212" dir="In" group="@%systemroot%\system32\vmms.exe,-210" internalName="VIRT-WMI-RPCSS-In-TCP-NoScope" lPort="135" name="@%systemroot%\system32\vmms.exe,-211" protocol="6" svc="rpcss" />"
[gle=0x80004005]
2013-07-17 23:17:42, Error                 CSI    00000014@2013/7/18:03:17:42.939 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_WIN32(ERROR_FILE_NOT_FOUND).
[gle=0x80004005]
2013-07-17 23:17:42, Error      [0x018004] CSI    00000060 (F) Failed execution of queue item Installer: Firewall Rule ({68ce8d69-26ae-4f9f-bea7-50613e7ab5c1}) with HRESULT HRESULT_FROM_WIN32(ERROR_FILE_NOT_FOUND).  Failure will be ignored: The failure was encountered during rollback; installer is reliable (2)[gle=0x80004005]
2013-07-17 23:17:42, Info     

Hi,

I started up my firewall, updated it and reran the hyper-v installation,  the same problem occurred, I also have uploaded a new et of logs.  could you have a look please and let me know what I need to do in order to get this to work

http://www.classifieds.ca/downloads/cbs.zip

Thanks,

Do you run an AV engine that has its own firewalling program?

Or are you running any 3rd party antivirus?

Hi,  No the only anti-virus program I might use sometimes is the Microsoft one..

IS this what is stopping me from installing Hyper-V,  Also please bear in mind the only reason that I'm wishing to install Hyper-v is to run the wp8 emulator.

Thanks, and looking forward to your response..

regards,

Hello,

Any takers?  any help would be appreciated..  I would really like to get this resolved.

thank you..

you have some issue with the servicing stack (the component which activates features and installs updates)

2013-07-18 15:56:56, Info                  CSI    0000000b Cannot fetch manifest for Microsoft-Windows-ServicingStack, Version = 6.2.9200.16612, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, the component is not staged
2013-07-18 15:56:56, Info                  CSI    0000000c ERROR MAPPING HRESULT - No proper NTSTATUS mapping available.  Error is: "c0150004 [Error,Facility=(0015),Code=4]".

and later in the log I see the same firewall issue again.

if it is ok to reinstall all desktop applications, do a refresh:

http://blogs.msdn.com/b/b8/archive/2012/01/04/refresh-and-reset-your-pc.aspx

http://windows.microsoft.com/en-US/windows-8/restore-refresh-reset-pc

If you don't want to loose them, try the inplace upgrade from Vista/7 to repair your Windows:

http://www.sevenforums.com/tutorials/3413-repair-install.html

Thank you very much for taking the time to help me out..

The in place upgrade did the trick and I didn't need to reinstall anything so that was great.

thank you very much.