Network problem
i use windows 7 ultimate x86
Error code:0x80070035
The network path was not found
help me
sorry my bad english
July 23rd, 2010 3:31am
Hi,
Can you explain more about what you were trying to do when the error
occurred?
-- Mike Burr
Free Windows Admin Tool Kit Click here and download it now
July 23rd, 2010 6:29pm
You have to check few settings..
Ensure that the firewall on both computers are set the enable "File and Printer Sharing"
Ensure NetBIOS over TCP/IP is enabled on both computers
Try with the following procedure also given in the link
http://support.microsoft.com/kb/929135
MCT,MCSE,MCSA,MCTS, Server Administrator
July 24th, 2010 9:07am
i like use network to friend's computer open
Free Windows Admin Tool Kit Click here and download it now
July 24th, 2010 5:16pm
Hi,
Hi,
I understand that you tried to access your friend’s computer and you received the error code
0x80070035. If I misunderstand, please feel free to let me know.
To troubleshoot this kind of issue, I would like to suggest the following steps:
1.
Make sure that the Network Discovery is enabled.
1)
Click Start.
2)
Click Control Panel.
3)
Click Networking and Sharing Center.
4)
Click the Drop Down arrow next to Network Discovery.
5)
Click the option, Turn on network discovery.
6)
Click apply.
2.
Temporarily disable Windows Firewall and Security software, then access your friend’s computer.
3.
Ping your friend’s IP address and see if you can ping it.
4.
Access the computer using
\\IPAddress\SharedFolder.
5. Enable NetBIOS over TCP/IP:
1) Go to “Control Panel\Network and Internet\Network Connections”.
2) Right-Click on the connection and choose Properties.
3) Click “Internet Protocol (TCP/IP) Version 4” in the list.
4) Click Properties, and then click Advanced.
5) On the Advanced TCP/IP settings windows, go to “WINS” tab.
6) Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
July 26th, 2010 8:34am
my friend using windows Xp Professional
Hi,
Hi,
I understand that you tried to access your friend’s computer and you received the error code
0x80070035. If I misunderstand, please feel free to let me know.
To troubleshoot this kind of issue, I would like to suggest the following steps:
1.
Make sure that the Network Discovery is enabled.
1)
Click Start.
2)
Click Control Panel.
3)
Click Networking and Sharing Center.
4)
Click the Drop Down arrow next to Network Discovery.
5)
Click the option, Turn on network discovery.
6)
Click apply.
2.
Temporarily disable Windows Firewall and Security software, then access your friend’s computer.
3.
Ping your friend’s IP address and see if you can ping it.
4.
Access the computer using
\\IPAddress\SharedFolder
.
5. Enable NetBIOS over TCP/IP:
1) Go to “Control Panel\Network and Internet\Network Connections”.
2) Right-Click on the connection and choose Properties.
3) Click “Internet Protocol (TCP/IP) Version 4” in the list.
4) Click Properties, and then click Advanced.
5) On the Advanced TCP/IP settings windows, go to “WINS” tab.
6) Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Free Windows Admin Tool Kit Click here and download it now
August 4th, 2010 5:15pm