I was testing out a Tenor AF on our Lync Server system, outbound calls are working fine but nothing inbound, I did a SIP trace and doesn't even seem to be landing on Lync. I was wondering if anyone had configured a Tenor AF on Lync could help out, I've toyed around with the configuration of the box some still no luck not sure what the issue could be.

 

You need to configure lync as the gateway under SIP, have you done that?

thanks

I have it configured to the IP address of the Lync Server, and the port is is set to 5060.

Okay I had the port number wrong I had it set up under TCP and the listening port on my meditation server I had set to 5068, Lync is now picking up the inbound call but it's not getting routed, I'll have to look further into this to see what the issue is. But thanks at least now the calls are hitting Lync.

Can't seem to still find the issue, this is the error I get for the inbound call on the SIP trace. Any ideas?

Trace-Correlation-Id: 663710757
Instance-Id: 0005E37D
Direction: outgoing;source="local"
Peer: mzlyncserv.local.mzisom.org:64679
Message-Type: response
Start-Line: SIP/2.0 400 Bad request
From: <sip:anonymous@local.mzisom.org;user=phone>;epid=604004E4EB;tag=1be4ba1032
To: <sip:+@local.mzisom.org;user=phone>;tag=2A29249069D312F72BD46800653F22AF
CSeq: 22409 INVITE
Call-ID: 89498c3f-20ff-4400-892f-a821433171fc
Via: SIP/2.0/TLS 192.168.20.24:64679;branch=z9hG4bKaba24e1b;ms-received-port=64679;ms-received-cid=B23800
ms-diagnostics: 4143;reason="Bad Phone Number";HRESULT="0xC3E93F21(SIPPROXY_E_INVALID_URI)";source="MZLYNCSERV.local.mzisom.org"
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record

Hi,

Is there any tutorial how to setup lync server and configure with tenor AF ?

Regards.

Mohamed. 

hi

did you solve this problem? i have exact same problem with tenor AF

thanks